Started by Mr. Analog, December 23, 2020, 05:01:17 PM
Quote from: Melbosa on January 06, 2021, 09:47:35 PMWe can look when I am over...
Quote from: Mr. Analog on January 06, 2021, 09:41:06 PMNot sure why all 4 wouldn't allow though
Quote from: Lazybones on January 06, 2021, 09:53:35 PMQuote from: Mr. Analog on January 06, 2021, 09:41:06 PMNot sure why all 4 wouldn't allow though4 should work fine but who knows if there is one bad module or one or two that are not seated correctly.Sounds like you have expert support coming over so you should be set
Quote from: Melbosa on January 07, 2021, 10:09:32 AMWoke up today with a bit of a sore throat and slight cough. Did you still want me to come by or see if I get better by the weekend?
Quote from: Mr. Analog on January 08, 2021, 01:36:22 PMDoing some reading and my RAM issue might be BIOS related. I'm gonna flash it tonight and see what happensHow you feeling Mel? Still up for the weekend?Sent from my Pixel 2 XL using Tapatalk
Quote from: Mr. Analog on January 08, 2021, 04:37:48 PMSo if I put two sticks of RAM in it works but if I put all four in it doesn't, I'm starting to think this is a motherboard hardware issueHere's a link to the manual, I have the 16 GB kit installed in the A2 and B2 slots as shown in the diagram in section 1.2.4, when I try putting in the other kit the mobo won't pass the RAM checkhttps://dlcdnets.asus.com/pub/ASUS/mb/LGA1150/Z87-PRO/E8489_Z87-PRO.pdfKinda frustrating...
Quote from: Mr. Analog on January 08, 2021, 05:34:24 PMYes and yes unfortunately :/
Quote from: Melbosa on January 08, 2021, 05:58:31 PMQuote from: Mr. Analog on January 08, 2021, 05:34:24 PMYes and yes unfortunately :/I can be a MHz speed or CL issue. I've seen that before where the faster ram should down clock to the other ram, but not always. Its actually not a good practice to mix MHz or CLs in RAM, for a few reasons. This could be the problem. We'll look tomorrow when I come by .
Page created in 0.060 seconds with 22 queries.